How To Install Window Blinds In Chicago

Countless Chicago homeowners choose window blinds when they want more privacy and governance over daylight in their homes. They’re a functional and economical window treatment. Capable DIYers can also install them in just a few steps. But, nothing is more convenient than working with a qualified window treatment installer. Here are the basics of putting up window blinds and when you should phone the experts to do it for you.

Measure And Mark Everything Precisely

Prior to beginning, decide if you should get outside-mount or inside-mount blinds. This crucial detail will let you know where to measure. Take measurements of the height, depth, and width on the inside of your window frame for inside-mount options. When hanging outside-mount blinds, measure the width and height of your window, which includes the trim, and add three inches to your measurements to make sure you get adequate coverage. Measure precisely–don’t round up or down. Poorly fitting blinds will not operate satisfactorily.

Order Your Blinds

Once you know your measurements, you can find your blinds. You probably know what type of blinds you wish to have. Get blinds that coincide with your measurements as closely as possible. Ready-made blinds might not fit exactly, either sticking out too far or not meeting the edge of the window properly. Make sure you are provided hardware that lets your blinds attach at the proper depth, too. You should order tailor-made blinds and parts for a perfect fit.

Install Your Window Blinds

Your blinds may be accompanied by instructions. Use them to install your exact product. If you want a glimpse of how difficult it is to install window blinds in Chicago, here is a summary of general steps to provide a general idea.

 

Inside Mount Blinds

 

1. Place a bracket on the top of the window’s frame about one inch from the edge. Make sure this placement won’t interfere with the blind’s operating mechanisms. Mark the bracket holes using a pencil.
2. Drill pilot holes on your marks.
3. Align the bracket holes with your pilot holes and fasten with screws.
4. Redo these initial three steps for the other bracket.
5. Pop the end caps onto the top rail of your blinds. Slide the headrail into the brackets.

Connect the tilt wand and test. In addition, try out the pull cord.

Outside Mount Blinds

1. Determine if you’re attaching to the window trim or wall above the window. Hold up the headrail and make sure the blind extends to the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark your bracket holes here.
4. Drill pilot holes on your marks.
5. Line up the bracket openings with the drilled holes and attach with screws at each end.
6. Position the headrail into the brackets.

Connect the tilt wand and test to ensure everything works.

Choose The Easiest Way To Install Blinds 

Just a reminder, you aren’t required to install blinds by yourself. The easiest way to install window blinds in Chicago is to seek out an expert window treatment installer. They will guide you at every step of the process. They’ll help you pick blinds that accommodate your needs, make accurate measurements for a made-to-order product, and install them for you. They guide customers every day, so they’ll handle your job efficiently and correctly. They’ll know how to remedy any challenges without wasting hours searching for help online. A window treatment specialist will also offer better-quality blinds than box stores or online resellers.

Save Yourself The Trouble And Hire Sunburst Shutters To Install Your Window Blinds In Chicago

Installing window blinds in Chicago couldn’t be more effortless when you work with Sunburst Shutters Chicago. We’ll help you choose custom-made blinds that will fit your windows perfectly, and our skilled installation crew will put them up for you. All you need to do is contact 847-250-6544 or fill out the form below to schedule a no-cost in-home consultation.